FIXED Juka Bows dont give slayers after being reforged

[adverserath]

I've just used a heartwood kit on a Juka bow then used my fletcher to modify the bow. The bow gave no slayer property.

I'm new to reforging too, arent those values low for a heartwood kit?

Bowcraft and Fletching – Ultima Online

uo.com

Unmodified Juka Lord bows can be re-forged with a runic fletching kit and/or imbued and then possibly even enhanced with special woods after they are modified, giving the potential for 6 or 7 item properties. The downside is the slayer applied is random so you could expend a lot of imbuing ingredients or charges on a runic tool only to end up with a ‘troll slayer’ bow.

 

[Dan]

I've just used a heartwood kit on a Juka bow then used my fletcher to modify the bow. The bow gave no slayer property.
View attachment 4226
I'm new to reforging too, arent those values low for a heartwood kit?

Bowcraft and Fletching – Ultima Online

uo.com

I just tried and it worked fine. If you get time later see if you can replicate on a test.

 

[adverserath]

Just tried now. It happened 2 times in a row. Then Visual studio crashed. I ran it up again and it worked correctly 5 times. The bow is in the backpack of the character "Parts". Unless there is a slayer type not displaying correctly

 

[adverserath]

Post automatically merged: Jun 2, 2021

props is showing the slayer type, but the ui isnt displaying it (tried a different classic client too)

 

[Dan]

View attachment 4227

Post automatically merged: Jun 2, 2021

props is showing the slayer type, but the ui isnt displaying it (tried a different classic client too)

Thanks, looking into it.

 

[adverserath]

I cant see a registered item property for these 2 slayers

ItemProperty.cs - Line starting 439
-SlayerName.DaemonDismissal
-SlayerName.BalronDamnation

 

[adverserath]

And if you save and reload the server then BaseWeapon.cs Deserialise (line 4098) changes it to Exorcism, so it shows as Demon slayer.

if (m_Slayer == SlayerName.DaemonDismissal || m_Slayer == SlayerName.BalronDamnation)
m_Slayer = SlayerName.Exorcism;

if (m_Slayer2 == SlayerName.DaemonDismissal || m_Slayer2 == SlayerName.BalronDamnation)
m_Slayer2 = SlayerName.Exorcism;

 

[Dan]

I took that bow on "Parts". Will return in a few.

 

[adverserath]

Just saw

I took that bow on "Parts". Will return in a few.

The saw the message

 

[Dan]

The basic issue, slayers not appearing right away, has been resolved with this item.

@adverserath has been awarded 10 Sovereigns.