Follow these simply steps to log onto UO Heritage and start playing today!
Step 1: Ensure you have the Classic Client installed on your computer.
- If you do not have the Classic Client installed on your computer you can get it from UO.com
Step 2: Fully Patch your Classic Client. To play on UO Heritage you are required to have the most current and up to date client version.
- To fully patch your UO client double click the UO icon located on your desktop. It will say patch complete when it is done patching.
- After this happens hit CANCEL.
Step 3: Pick an Assistant to log in with.
- All approved Assistants can be downloaded right from TrueUO.com
- Install your selected Assistant and place icons on your desktop or start bar.
Step 4: Start up your assistant and configure the settings.
- For UOSteam ensure the follow settings are set correctly:
- 1 - Ensure Remove Encryption is checked off.
- 2 - Make sure you type in play.trueuo.com for the server address
- 3 - Make sure the Port is set to 2593
- 4 - Click START and UO will launch.
- For Razor ensure the follow settings are set correctly:
- 1 - Ensure Remove Encryption is checked off.
- 2 - Make sure you type in play.trueuo.com for the server address
- 3 - Make sure the Port is set to 2593
- 4 - Click START and UO will launch.
Step 5: Create your account and log in!
- UO Heritage uses auto account creation.
- Simply type in the username and password you wish to use, right from the UO client screen.
We hope this guide was easy and clear enough. Please forward any improvement suggestions to the TrueUO.com staff.
Last edited: